Innorel PW50 table tripod & monopod base

The Innorel PW50 can be used as a small tripod, or as a monopod base. It’s well made, build completely from metal with rubber on the end of the feet. It can be collapsed in both directions, so it can be put into a small compact state. There is a 3/8″ to 1/4″ adapter included, but by using it the tripod gets taller.

The legs lock into two positions, the lower will make the tripod 9cm in height (when without the adapter) and the taller will be 19cm (also without the adapter). The legs snap into place easily and in both configurations, the tripod feels solid. The manufacturer declares the weight limit at 10kg.

I tried it with a smaller and also a bigger camera. In both situations the tripod and also the ball head held fine. There is no slit on the side of the ball head, so you can’t put a camera vertically if you don’t have an L-bracket. This is not really a problem with a DSLR, as it’s big to rotate anyway, but if you want to do a vertical shot with a smaller camera, this is not the tripod for you. You also can’t point the camera up by more than about 45%.

The 3/8″ screw is quite long, probably because it’s also used as a monopod base. It makes attaching a plate clamp a bit problematic. For all I have, the screw goes through and mostly obstructs the quick release plate. Of course, you can use the 1/4″ adapter, and then another 1/4″ to 3/8″ adapter on the plate clamp, but that makes the tripod taller and less stable. Luckily for me, if I use the L bracket, the screw is not in the way.

When you remove the rubber foot from the monopod part of the Innorel RT85C tripod, you can attach the PW50 as a monopod base. It has a rubber foot on it, so you can keep it on even collapsed. It collapses around the monopod, so it does not add much bulk to it. The tripod feels stable when in the fully opened state, as the base of 34cm diameter is quite big.